+90 312 284 08 90 info@asdasglobal.com

ASPHALT CHEMICALS

ASDAS PRIME - PRIME COAT
n alternative to the conventional bitumen binders that are used and derived from MC 30 (Fm2B2) that contain a high amount of petrochemical solvent

PRODUCT

PRIME COAT

Emulsified Prime Coat is a US-patented, nanotechnologically produced, non-ionic textured resin emulsion that was developed as an alternative to the conventional bitumen binders that are used and derived from MC 30 (Fm2B2) that contain a high amount of petrochemical solvent.

PRODUCT

PRIME COAT FEATURES

What is Coat?

Bitumen is a mixture of hydrocarbons of natural origin or a mixture of hydrocarbons of pyrogenic origin (formed naturally/by heat-effect/as a result of melting), or a combination of both. It is often described as a material that can take the form of a gas, liquid, semi-solid or solid of the aforementioned components, found together with their non-metallic derivatives, that has adhesive characteristics and that is completely soluble in carbon dioxide. The emulsion refers to the uniform distribution of one of the two liquids, which are essentially insoluble in one other, in the form of small spherical particles in the other liquid.

A Unique Product

In general, emulsions are produced as two basic surfactants: anionic and cationic. Unlike these two structures, however, an Emulsified Prime Coat has a “nonionic character” that brings very important application advantages: The Emulsified Prime Coat can be easily bonded to any kind of aggregate (including limestone and basalt), regardless of the electrical charge (anionic or cationic) of the surface to which it is applied. Cutback coatings used in the sector include high-density petrochemical solvents (solvent groups such as Paraffin Oil, Kerosene, etc.). However, the Emulsified Prime Coat is an exclusive and special bitumen emulsion. Its US-patented formula contains no hazardous components, including Volatile Organic Compounds, or organic/synthetic solvents or their derivatives. This feature makes Emulsified Prime Coat a matchless and “unique” product.

features

Emulsified Prime Coat at a Glance

N

Application Rate: 1-1,5 kg /m2

 
N

Effective penetration feature.

 
N

To the depth it penetrates, increases the basic strength by binding the aggregates to each other.

 
N

Provides superior adhesion between the surface asphalt coating and the base.

 
N

Has a nonionic structure, and so easily adheres to all kinds of surface.

 
N

Gives an advanced level of impermeability to the surface to which it is applied.

 
N

3–4 hour curing.

 
N

Insoluble in rain water after curing.

 
N

Available in concentrated form. It should be diluted 1:4 (w:w) before using. In this way, shipping costs are minimized.

 
N

No special precautions and/or equipment is required in terms of occupational health and safety.

 
N

No adhesion to exterior surfaces of vehicles and equipment. It can be easily cleaned with water from all surfaces before curing.

 
N

Free of Volatile Organic Components (VOC).

 
N

No toxic solvents used in the formulation.

 
N

Not flammable and/or inflammable.

 
N

Poses no threat for water sources of mammals.

 
N

Free of any carcinogenic substances.

 

EMÜLSİYON ASTAR

Uygulama Çalışmaları

CONTACT US

Your Partner

At Asdaş Asfalt, we are designing solutions to solve your most demanding problems and reducing costs while saving time & energy. Our team of experts can help you choose the right emulsifier, learn about sustainable hot mix asphalt or improve recycling.

Contact Us

Office ADDRESS

KIZILIRMAK MAH. 1443. CAD.
NO:22/12 ÇANKAYA, ANKARA

ASDAŞ FACTORY

ASO 2. ORGANİZE SANAYİ SİTESİ 2031. CAD NO: 14 ALCI KÖYÜ TEMELLİ - SİNCAN ANKARA

CONTACT INFO

+90 312 284 08 90 - 91
info@asdasglobal.com